·
Screwdriver
o Phillips #00 (or close)
o Slotted #1.0 (or close)
·
Guitar pick (or pry tool)
1. There are (2) screws that
need removed from the front
a.
Use a slotted screw driver (or blade) to remove the screw cover and
then the screws
2. Pry gently from inside edge
with fingers (all the way around) to release the cover
3.Use
the guitar pick (or like item) and run around the outer edge to completely
release the frame. (caution not to hit the camera or wires with tools)
4. I only loosened the (4)
screw in this next step. However you may choose to completely remove them.
a.
Loosen the (4) screws for easy access to the screw holding the LCD
b.
Remove the (4) screws holding the LCD
•
2 one each side
5. Lay the LCD down to unplug
a.
Use a guitar pick to gently pry the adhesive loose and unplug
6. Plug the new LCD in and put
it in place I
a.
Insert the (4) screws that hold the screen in the frame.
b.
Tighten the (4) screws that that hold the LCD to the housing.
c.
Put the cover/frame in place and squeeze gently to snap in place
d.
Insert the (2) final screws and you are DONE!
I
personally rate this screen replacement a 2 out of 10. (10 being difficult)
Purchase your replacement screen today
